City of Spokane

Spokane Municipal Code

***Note: Many local criminal codes can now be located under Chapter 10.60 SMC while others are now cited under the Revised Code of Washington (RCW), which was incorporated into the municipal code in 2022. (See SMC 10.58.010). Code Enforcement, including Noise Control and Animal Regulations are located in Chapters 10.62 through 10.74.

Home
Title 17C
Chapter 17C.120
Sections 17C.120.570...
 

Title 17C Land Use Standards

Chapter 17C.120 Commercial Zones

Section 17C.120.570 Treating Blank Walls – Building Design
  1. Purpose.
    To mitigate blank walls by providing visual interest.

  2. Treating Blank Walls Implementation.

    1. Where windows are not provided on walls (or portions of walls) facing streets or visible from right-of-way, at least four of the following elements shall be incorporated: (R)

      1. Masonry (but not flat concrete block).

      2. Concrete or masonry plinth at wall base.

      3. Belt courses of a different texture and color.

      4. Projecting cornice.

      5. Projecting metal canopy.

      6. Decorative tilework.

      7. Trellis containing planting.

      8. Medallions.

      9. Opaque or translucent glass windows.

      10. Artwork such as sculptures, murals, inlays, mosaics or elements integrated with the project.

      11. Vertical articulation.

      12. Lighting fixtures.

      13. Recesses.

      14. An architectural element not listed above, as approved, that meets the intent of this section.

Date Passed: Tuesday, May 31, 2005

Effective Date: Wednesday, July 6, 2005

ORD C33636 Section 1

Section 17C.120.570 Treating Blank Walls – Building Design
  1. Purpose.
    To mitigate blank walls by providing visual interest.

  2. Treating Blank Walls Implementation.

    1. Where windows are not provided on walls (or portions of walls) facing streets or visible from right-of-way, at least four of the following elements shall be incorporated: (R)

      1. Masonry (but not flat concrete block).

      2. Concrete or masonry plinth at wall base.

      3. Belt courses of a different texture and color.

      4. Projecting cornice.

      5. Projecting metal canopy.

      6. Decorative tilework.

      7. Trellis containing planting.

      8. Medallions.

      9. Opaque or translucent glass windows.

      10. Artwork such as sculptures, murals, inlays, mosaics or elements integrated with the project.

      11. Vertical articulation.

      12. Lighting fixtures.

      13. Recesses.

      14. An architectural element not listed above, as approved, that meets the intent of this section.

Date Passed: Tuesday, May 31, 2005

Effective Date: Wednesday, July 6, 2005

ORD C33636 Section 1