Title 17C Land Use Standards
Chapter 17C.122T Center and Corridor Zone Development Tables
Section 17C.122T.004 Table 17C.122.110-1 Center and Corridor Zone Development Standards
TABLE 17C.122.110-1
CENTER AND CORRIDOR ZONE DEVELOPMENT STANDARDS [1] |
| STANDARD |
CC1 |
CC2 |
CC4 |
| Minimum setback from street lot line |
0 ft. [2] |
0 ft. [2] |
0 ft. [3] |
| Minimum setback from R1 and R2 zoned lots [4] |
10 ft. |
10 ft. |
10 ft. |
| Minimum setback from lot line abutting O, OR, NR, NMU, CB, GC, DT, CC, LI or HI zoned lot [4] |
0 ft. |
0 ft. |
0 ft. |
| Minimum front lot line |
10 ft. |
10 ft. |
10 ft. |
| Landscaping required [5] |
Yes |
Yes |
Yes |
| Parking required [6] |
Yes |
Yes |
Yes |
Notes:
[1] Plan district of overlay zone standards may supersede these standards.
[2] Buildings over 70 ft. tall must follow chapter 17C.250 SMC, Tall Building Standards.
[3] When abutting R1 and R2 zoned lots, the minimum structure setback from street lot line is the same as the abutting residential zoning district for the first 60 ft. from the boundary of the abutting residential zoning district. See SMC 17C.120.230 for additional standards and exceptions. This does not apply when a zone boundary is within the public right-of-way.
[4] Structure setbacks are measured from the lot line.
[5] For general information purposes only. See chapter 17C.200 SMC, Landscaping and Screening, for the specific standards.
[6] For general information purposes only. See chapter 17C.230 SMC, Parking and Loading, for the specific standards. |
Date Passed: Monday, February 25, 2013 Effective Date: Thursday, April 4, 2013 ORD C34961 Section 3 |
|
