Title 17C Land Use Standards
Chapter 17C.240 Signs
Section 17C.240.230 Standards in the Commercial and Industrial Zones
- General Standards and Sign Features.
All permanent signs in Commercial and Industrial zones must comply with the standards detailed in Tables 17C.240.230-1 and 17C.240.230-2.
Table 17C.240.230-1
Standards for Permanent Signs in
Commercial, Center and Corridor, and Industrial Zones [1]
|
|
DTC, DTG, DTU, DTS, GC, LI & HI [8]
|
CC2, CB, & CA3 [2][8]
|
O, OR, NR, NMU
|
CC1, CA1 & CA2 [2]
|
CC4 [2]
|
SIGNS ATTACHED TO BUILDINGS
|
Size Allocation
|
1-1/2 sq. ft. per 1 ft. of primary building wall or 15 percent of the primary building wall, whichever is greater
|
1 sq. ft. per 1 ft. of primary building wall if a freestanding sign is also on the same street frontage,
1-1/2 sq. ft. per 1 ft. of primary building wall if there is no freestanding sign on the same street frontage
|
Same
|
Same
|
15 sq. ft.
|
Maximum Number
|
No limit within size allocation
|
Same
|
Same
|
Same
|
1
|
Maximum Area Per Sign
|
250 sq. ft. In the DT Zones, the maximum area per sign attached to a building is not limited
|
100 sq. ft.
|
50 sq. ft.
|
50 sq. ft.
|
15 sq. ft.
|
Minimum Guaranteed Sign Area for a Ground Floor Tenant Space
|
32 sq. ft.
|
Same
|
Same
|
Same
|
15 sq. ft.
|
TYPES ALLOWED
|
Fascia, Awning, Marquee, Roof Mounted, Painted Wall
|
Yes
|
Yes
|
Yes
|
Yes
|
Yes
|
Projecting
|
Yes, but no projecting signs if a freestanding sign is also on the same street frontage
|
Same
|
Same
|
Same
|
Same
|
FREESTANDING SIGNS
|
Maximum Number
|
1 per site or 1 per 300 ft. of arterial street frontage and 1 for each additional 300 ft. or fraction thereof [3]
|
1 per arterial street frontage
|
1 per arterial street frontage
|
1 monument sign per arterial street frontage
|
1 monument sign per building
|
When Not Allowed
|
Not Limited
|
Not allowed if there is already a projecting sign on the same site frontage, or if existing signs attached to buildings exceed the limit of 1 sq. ft. to 1 ft. of primary building wall
|
Same
|
Same
|
Not allowed if there is already a wall or projecting sign
|
Size Allocation for All Freestanding Signs
|
1 sq. ft. per 1 ft. of arterial street frontage
Local street frontage can be used if there are not arterial site frontages
|
Same
|
Same
|
Same
|
15 sq. ft.
|
Size Limit
|
250 sq. ft.
|
75 sq. ft. [5]
|
50 sq. ft. [5]
|
50 sq. ft.
|
15 sq. ft.
|
Maximum Height [6]
|
35 ft.
In the DTS zone, the maximum height is 60 ft.
|
20 ft.
|
20 ft.
|
5 ft.
|
5 ft.
|
ADDITIONAL SIGNS ALLOWED
|
Directional Signs, Temporary Signs [7]
|
See SMC 17C.240.243(D) and SMC 17C.240. 244
|
Yes = Allowed No = Prohibited
Notes:
[1] Temporary signs are regulated under SMC 17C.240. 244(H), Temporary Signs.
[2] Signs in CC and CA zones are subject to the standards and guidelines contained in the Initial Design Standards and Guidelines for Centers and Corridors.
[3] On sites with frontages longer than 300 feet, sign area earned from the first 300 feet may not be used on the second sign. For example, a 350-foot street frontage may have a 200 sq. ft. and a 50 sq. ft. freestanding sign. Interstate freeways, United States highways, state routes that are not also City of Spokane Arterials are not considered arterial streets for purposes of this Title. Sites with frontage on more than one arterial are allowed a freestanding sign on each arterial. The size allocation for each freestanding sign shall be calculated independently using only the length of the arterial frontage adjacent to the freestanding sign. The square footage allowance for freestanding signs for one arterial shall not be transferred to other arterials.
[4] Where a site has no arterial street frontage, one freestanding sign is allowed.
[5] The maximum sign area may be an additional twenty-five square feet for each additional business on a site having more than one business, up to a maximum area of one hundred fifty square feet.
[6] This height limit is for the total height of the combined sign face and sign structure.
[7] These signs may be allowed in addition to signs attached to buildings and freestanding signs when they meet the standards of SMC 17C.240. 243 (D) and SMC 17C.240. 244.
[8] Signage standards for mini-storage facilities are listed in 17C.350. Mini-storage facilities are not permitted in the DTC or CA3 zone.
|
Table 17C.240.230-2
Sign Features for All Signs in Table 17C.240.230-1
|
|
GC, CC2, Downtown, CB, LI, HI, O, OR, NR, NMU, CC1 & CC4
|
Electronic Message Center Sign Features
|
Allowed [1][2]
|
Lighting
|
Direct, Indirect, or Internal
|
Maximum Distance
Extending into ROW
|
See SMC 17C.240.220(E)
|
Maximum Area
Extending into ROW
|
See SMC 17C.240.220(E)
|
Bonus Allowance for Outstanding Design
|
See SMC 17C.240.290
|
Notes:
[1] Electronic Message Center sign features are allowed in the GC, CC2, Downtown, CB, LI, HI O, OR, NR, NMU, & CC1 zones if they meet the standards of SMC 17C.240.240, Electronic Message Center Signs.
[2] Electronic Message Center sign features are not allowed in the CC4 Zone
|
Date Passed: Monday, January 29, 2018 Effective Date: Saturday, March 17, 2018 ORD C35577 Section 19 |
|