Title 17C Land Use Standards
Chapter 17C.123 Form Based Code Zones
Section 17C.123.080 Additional Requirements
Outdoor Activities
The standards of this section are intended to assure that outdoor sales, display, storage, and work activities will not have adverse impacts on adjacent properties or the environment, while providing the envisioned built form within the area.
Outdoor Sales and Display Areas.
Outdoor sales and display areas are limited to forty percent of lot area or one thousand five hundred square feet, whichever is less, in the CA1 zone.
Outdoor sales and display areas for uses in the industrial use categories are not allowed in the CA1 zone.
In the Shopfront designations, accessory outdoor sales are permitted so long as the Clear Pedestrian Zone and Buffer Zone is maintained.
In the Shopfront designations, outdoor display areas are prohibited.
Outdoor Storage Areas.
Outdoor storage areas are not permitted.
Outdoor Activity Area Improvements.
Outdoor activities shall be screened and landscaped according to the provisions of chapter 17C.200 SMC , Landscaping and Screening.
In order to control dust and mud, all vehicle circulation areas must be paved.
Fence s.
The fence standards avoid adverse impacts on the area while protecting public or vehicle safety. Fence s near streets are kept low in order to allow visibility into and out of the site and to ensure visibility for motorists. Fence s in any required side or rear setback are limited in height so as to not conflict with the purpose for the setback.
Type of Fence s.
The standards apply to walls, fence s, and screens of all types whether open, solid, wood, metal, wire, masonry, or other material.
Location, Height, and Design
Street Setbacks.
No fence or other structure is allowed within twelve feet from the back of the curb, consistent with the required sidewalk width of SMC 17C.123.050 .
Fence s up to three and one-half feet high are allowed in a required street setback.
Fence s up to six feet high are allowed in required side or rear setbacks except when the side or rear setback abuts a pedestrian connection. When the side or rear setback abuts a pedestrian connection, fence s are limited to three and one-half feet in height.
Fence s shall not reduce the required setback width of SMC 17C.123.030 .
Sight-obscuring Fence s and Walls.
Any required or non-required sight-obscuring fence s, walls, and other structures over three and one-half feet high, and within fifteen feet of a street lot line shall either be placed on the interior side of a L2 see-through buffer landscaping area at least five feet in depth (See chapter 17C.200 SMC , Landscaping and Screening), or meet the treatment of blank walls intent outlined in SMC 17C.122.060 – Initial Design Standards and Guidelines for Center and Corridors.
Fencing Material.
Fence materials within the public right-of-way or within eight feet of a street lot line should be wrought iron or similar in appearance, aluminum, metal, or similar material.
Walls visible from streets shall be masonry, stone, brick, or similar construction.
Chain link fencing is not allowed that is visible from and/or adjacent to a public street.
Prohibited Fence s.
No person may erect or maintain a fence or barrier consisting of or containing barbed, razor, concertina, or similar wire.
No person may maintain a fence or barrier charged with electricity.
A fence , wall, or other structure shall not be placed within a public right-of-way without an approved covenant as provided in SMC 17G.010.160 and any such structure is subject to the height requirement for the adjoining setback.
No permanent fence may reduce the required sidewalk width.
Visibility at Intersections.
A fence , wall, hedge, or other improvement may not be erected or maintained at the corner of a lot so as to obstruct the view of travelers upon the streets.
Subject to the authority of the traffic engineer to make adjustments and special requirements in particular cases, no fence exceeding a height of thirty-six inches above the curb may be located within the Clear View Triangle, as defined in Section 17A.020.030 “C” Definitions .
Date Passed: Monday, August 12, 2024
Effective Date: Sunday, September 15, 2024
ORD C36553 Section 8